CTS GmbH (Germany) – Environmental Simulation Test System

CTS 122

CTS is one of the leading specialists worldwide for production of environmental simulation equipment for research, quality control and production. Our know-how is based on many years of experience in the branch. The innovative and technically high quality CTS temperature and climatic test cabinets, produced in our state-of-the-art production facilities at our headquarters in Hechingen, are appreciated the world over by well-known industrial companies for their excellent reliability and perfection.

 

Listed are the following CTS chambers available:

-----------------------------------------------------------------------------------------------------------------------------------


climatic1

Climatic Test Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Service-friendly capacitive humidity measurement system
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

100 / 200 / 350 / 600 / 1000 / 1500 / 2000 / 3000

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm
  • Shelves
  • Panoramic window, multiple glazed, sized 570 x 710 mm; for units = 200 ltr.
  • Hand-hole in the door
  • Pt 100 for temperature measuring on test specimen
  • Alternative reversible to controller function
  • Air dryer system
  • Mobile unit design
  • Temperature protection for test-specimen
  • Water cooled compressor
  • CID software for programming and documentation
  • Variable air speed in the test space
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45

Temperature range

+-70°C ... -40°C ... -20°C ... +10°C to +180°C

Humidity range

10 – 95 % RH

Description

climatic2

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

temp1

Temperature Test Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

25 /50 /100 /200 / 350 / 600 / 1000 / 1500 / 2000 / 3000

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm
  • Shelves
  • Panoramic window, multiple glazed, sized 570 x 710 mm; for units = 200 ltr.
  • Hand-hole in the door
  • Pt 100 for temperature measuring on test specimen
  • Alternative reversible to controller function
  • Air dryer system
  • Mobile unit design
  • Temperature protection for test-specimen
  • Water cooled compressor
  • CID software for programming and documentation
  • Variable air speed in the test space
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45

Temperature range

-40°C / +180°C
-70°C / +180°C

Description

temp2

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

bt1

Temperature Test Chambers (Bench Top Version)

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

25 /50

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm
  • Rack incl. 1 shelf
  • Table with height 330 or 515 mm
  • Window, multiple glazed
  • Pt 100 for temperature measuring on test specimen
  • Reversible to controller function
  • Air dryer system
  • Temperature protection for test-specimen
  • CID software for programming and documentation
  • Variable air speed in the test space
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45

Temperature range

-40°C / +180°C
-65°C / +180°C

Description

bt2

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

ss1

Stress Screening Climatic Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Service-friendly capacitive humidity measurement system
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

100 / 200 / 350 / 600 / 1000 / 1500 / 2000 / 3000

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm
  • Shelves
  • Panoramic window, multiple glazed, sized 570 x 710 mm
  • Hand-hole in the door
  • Pt 100 for temperature measuring on test specimen
  • Specimen alternative reversible to controller function
  • Air dryer system
  • Mobile unit design
  • Temperature protection for test-specimen
  • Water cooled compressor
  • CID software for programming and documentation
  • Variable air speed in the test space
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45

Temperature change rates

5 to 30 K/min

Temperature range

-40°C / +180°C
-70°C / +180°C

Humidity range

10 – 95 % RH

Description

ss2ss3ss5ss4

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

ts1

Thermal Shock Test Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Observation window
  • Air dryer system to avoid freezing in long time testing
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Extreme high temperature change rates
  • Up to 3000 cycles without defrosting
  • Minimum external measurements due to compact method of construction
  • Service-friendly construction
  • Minimum noise level
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Options

  • Cycle operation in the cold chamber
  • Increased entry ports ∅ 125 mm (for 130 + 350 ltr.)
  • baskets in different design
  • Increased temperature range hot chamber + 250°C (for 130 ltr.)
  • Temperature protection for test specimen
  • Pt 100 for test specimen measuring
  • CID software for programming and documentation
  • Water cooled condenser for TSS -70/32
  • Air cooled condenser for TSS -70/130 and TSS -70/350
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45
  • Higher test load

Test space capacity in liters

32 / 66 / 130 / 350

Temperature range

Hot chamber: +50°C / +200°C

Cold chamber: -80°C / +100°C

Description

ts2

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

v1
v1

Vibration Climatic Test Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Service-friendly capacitive humidity measurement system (CV)
  • Single-hand operated door handle, lockable
  • 2 entry port ∅ 125mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • Very high temperature change rates
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Interface with every electrodynamics shaker
  • Interior in high quality stainless steel grade 1.4301
  • Complies with current CE and EMC regulation

Test space capacity in liters

390 / 670 / 1000 / 1700 / 2200

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm
  • Panoramic window, sized 570 x 710 mm
  • Pt 100 for temperature measuring on test
  • Specimen alternative reversible to controller function
  • Air dryer system
  • Electronic vertical movement
  • Standard floor for use as a climatic chamber
  • Mobile design
  • Temperature protection for test-specimen
  • CID software for programming and documentation
  • RS 232 interface changeable to USB
  • ETHERNET interface RJ 45

Temperature change rates

5 to 20 K/min

Temperature range

-40°C / +180 °C
-70°C / +180°C

Humidity range

10 – 98 % RH

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

wd3wd4wd2wd5wd1

Walk-In and Drive-In Climatic Chambers

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Service-friendly capacitive humidity measurement system
  • single-hand operated door handle, lockable
  • entry port ∅ 50 mm
  • error display in plain text
  • potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity

>2 m3

Humidity range

10-98% RH

Options

  • Light modules
  • Version for corrosion testing
  • Version for airbag shoot
  • Explosion-proof version
  • Version for vibration testing

Types

  • Illumination with IR or UV light
  • Corrosion chambers
  • Airbag chambers
  • Atex chambers
  • Vibration Walk-In chambers

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

pv5pv2
pv3pv4
pv1

Climatic Chambers for the Solar and Photovoltaic Industry

CTS is the only European manufacturer of environmental simulation equipment that, applying the most advanced technology in our sector, complies 100% with the EN 61215 specification for the certification of photovoltaic panels.

Characteristics:
We offer the following equipment for compliance with each standard.

  • IEC 61215 part 10.10 - UV Test with black tunnel
  • IEC 61215 part 10.11 - Temperature shock cycling test
  • IEC 61215 part 10.12 - Humidity freezing test
  • IEC 61215 part 10.13 - Damp heat test
  • IEC 62108 part 10.6, 10,7 y 10,8 - Concentrator photovoltaic (CPV) modules.
  • IEC 61701 - Salt fog and corrosion test
  • IEC 61646 - Thin film PV modules
  • IEC 60904-9 - Solar Simulation

Description
pv6

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

li1

Explosion-protected Chambers for Li-Ion batteries

Included in the standard version

  • Multi-color touch panel / 32 Bit Controller
  • Service-friendly capacitive humidity measurement system
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • Shelf, stainless steel
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • High temperature change rate
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

200 / 350 / 600 / 1000 / 1500 / 2000

Options

  • entry ports ∅ 50 mm, 80 mm und 125 mm completely welded
  • Shelves
  • panoramic window, multiple glazed, sized 570 x 710 mm; for units = 200 ltr.
  • Break rupture membrane
  • Pt 100 for temperature measuring on test specimen
  • Electronic door open
  • Venting duct
  • Temperature Limiter
  • Emergency stop button
  • CO2 flushing device
  • CO, H2 and HC Sensor
  • N2 Inertization system
  • Hazard Level 0 to 7

Temperature range

-40°C / +180°C
-70°C / +180°C

Humidity range

10 – 95 % RH

Description

CTS GmbH developed a safety concept and confirmed from the TÜV SÜD Industry Service with the certificate Nr. IS-EG1-10-1546532 for manufacturing of climatic chambers for Li-Ion test.

li2

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

pl1
pl2pl3pl4pl5

Plant Growth Climatic Chambers

The model CPH-L chambers, with precise control of the temperature, relative humidity and light allow long duration testing and offer researchers and biologists access to any climate to simulate nature’s action.

This equipment, designed exclusively for the biological and bio-pharmaceutical sectors, allow for versions of illumination adaptable to any type of simulation such as plant growth, insect incubation, germination, seed storage and arabidopsis.

Included in the standard version

  • Multicolor touch panel
  • Service-friendly capacitive humidity measurement system
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • 4 shelf, stainless steel for CPHL 6 and 8 for CPHL 12
  • Light intensity from 100 to 620 µmol m-2s-1
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Mobile design

Options

  • entry ports ∅ 50 mm, 80 mm
  • Shelves
  • Panoramic window (only without lights)
  • Hand-hole in the door
  • Pt 100 for temperature measuring on
  • Test specimen alternative reversible to controller function
  • CID software for programming and documentation
  • Light intensity adjustable from 10% to 100%
  • LED Illumination

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

ph1ph2ph3

Pharmaceutical ICH Stability Climatic Chambers

The model CPH chambers, with precise control of temperature and relative humidity allow for long term pharmaceutical tests that conform to the ICH specifications in the sections according to the Q1A guide:

– ICH Long term test +25°C +/- 2°C / 60% RH +/- 5% RH
– ICH middle term test +30°C +/- 2°C / 65% RH +/- 5% RH
– ICH accelerated term test +40°C +/- 2°C / 75% RH +/- 5% RH

In the pharmaceutical industry the maximum safety level comes virtue of the validation against the FDA 483 specification. This equipment has been designed exclusively for the pharmaceutical sector with, on request, the documentation of the most rigorous validation IQ, OQ, PQ & CQ.

Included in the standard version

  • Multi-color touch panel/32 Bit Controller
  • Service-friendly capacitive humidity measurement system
  • Single-hand operated door handle, lockable
  • Entry port ∅ 50 mm
  • 6 shelf, stainless steel for CPH 6 & 12 for CPH 12
  • Error display in plain text
  • Potential free contact for malfunction signal
  • RS 232 interface
  • Service-friendly construction
  • Minimum noise level
  • Simple user-friendly operation and programming
  • Low power-consumption datas
  • Optimized parameters for highest testing precision
  • Complies with current CE and EMC regulation
  • Control: microprocessor control and monitoring system
  • Test space: stainless steel grade 1.4301
  • Mobile design

Options

  • entry ports ∅ 50 mm, 80 mm
  • Shelves
  • Panoramic window
  • Hand-hole in the door
  • Pt 100 for temperature measuring on test specimen alternative reversible to controller function
  • Test specimen alternative reversible to controller function
  • CID software for programming and documentation
  • Alarms
  • Validation documentation IQ, OQ, PQ & CQ

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top

-----------------------------------------------------------------------------------------------------------------------------------

Special Projects and Climatic Chambers

sp1

sp2

 

 

 

 

 

 

 

Climatic Chambers with LN2 spraying                                                Climatic Generator for bank test

 

 

sp3

sp4

 

 

 

 

 

 

 

Special door requirement                                                                            Vacuum Chambers

 

 

sp5sp6

 

 

 

 

 

 

 

Corrosion chambers, VDA new                                                                Walk-In chambers with special door

 

 

sp7sp8

 

 

 

 

 

 

 

Solar Simulation DIN 75220                                                                      Air conditioning unit with separate box

 

 

sp9

sp10

 

 

 

 

 

 

 

Corrosive gas chambers                                                                               Stress conditioning air unit

 

 

sp11sp12

 

 

 

 

 

 

 

LED illumination                                                                                                Special painting black interior

For more information on the products or if you require a quotation, do feel free to fill in the form.

Back to Top