UV operates a manufacturing facility in Singapore . At present, it is dedicated towards the manufacturing of wet process equipments, wafer fabr ication tools and...
All products will be exposed to a variety of climatic conditions over the use of the product life. A given product may be exposed to a variety of environmental extremes from the time the product is manufactured, packaged, transported, and stored until it reaches its final destination.
We offer CTS Gmbh’s range of environmental testing products which are used to simulate these conditions to find product flaws before the product reaches the customer – saving substantial warranty and product recalls. There are many models available.
Climatic Test Chambers
Test chamber volume: 60, 200, 350, 600, 1000, 1500 litres
Temperature ranges:
+10°C to +180°C
-20°C to +180°C
-40°C to +180°C
-70°C to +180°C (optional -75°C)
Climate ranges :10% to 98% relative humidity (rel. hum.)
Temperature fluctuation : ± 0,1 to ± 0,3 Kelvin temporary
Dew point range : +5°C to 89,5°C
Deeper dew points as options
Humidity Fluctuations :
±1% to ±2% rel. hum. under 90% rel. hum.
±1% to ±3% rel. hum. above 90% rel. hum
Shock Test Chambers
Test chamber volume : 32litres, 130 litres and 350 litres
Temperature ranges : Heat chamber +50°C to +220°C (+250°C)
Cold chamber :-70°C to -10°C
Extremely high rates of increase and decrease for the temperature
Compliance with the actually valid test standards
Lift cage drive with spindle-type gear mechanism
Temperature probe in lift cage, as well as further measuring and supply lines, to be installed from the top, using leadthrough
