Reliability Test System

Trio-Tech HAST System
(Highly Accelerated Stress Test)

The Trio-Tech HAST System is designed to evaluate the reliability of plastic-encapsulated ICs and other microelectronic devices under high-humidity conditions. By applying extreme levels of temperature, humidity, and electrical bias (or non-bias), the system accelerates moisture penetration through external protective materials such as encapsulants or seals. This enables rapid assessment of long-term reliability and environmental durability in a controlled test environment.

Trio-Tech Centrifuge System
(Centrisafe Series)

The Centrisafe Series is a microprocessor-controlled centrifugal accelerator designed for high-speed, constant acceleration testing of electronic components under a wide range of “G” forces. It is ideal for evaluating the mechanical integrity of integrated circuits in bulk fixture form and is capable of identifying issues such as wire-bond and die-attach failures, poor lead attachments, and compromised seals in hermetic packages.

This system enables testing at acceleration levels that are not achievable through conventional methods such as tumbling, vibration, or high-shock testing, making it a critical tool for advanced reliability screening.

Specifications

  • Speed : 0 – 19,000 RPM
    Continuous Torque : 5 or 9.5 lb/ft
    Peak Torque : 18 or 23 lb/ft

  • Dimensions: 36” X 30” X 38”
  • “G” Range: 0 – 40,000 Gs

Trio-Tech Gross & Fine Leak Pressurization Test System + Trio-Tech Bubble Tester System

Designed for semiconductor applications, the Trio-Tech Gross & Fine Leak Pressurization Test System and Bubble Tester System are used to detect leakage in hermetically sealed ICs. These systems are essential for ensuring the integrity of sealed packages by identifying both gross and fine leaks through precise pressurization and bubble detection methods.

Ideal for use in the semiconductor and defence industries, this equipment supports applications that demand a high level of reliability and quality in component sealing.

Gross and Fine Leak Pressurization Test Equipment Specs:

  • Vacuum Range: 0.5 to 5 Torr
  • Pressure Range: 20 to 125 Psia
  • Chamber Volume: 7 to 25 Liters

Bubble Tester Specs:

  • Temperature Range: 50 to 145°C
  • Chamber Volume: 3 to 12 Liters

Secure your edge with our innovations

Leverage advanced, reliable equipment and expert support to keep your business ahead of the competition.

HAST SYSTEM – HIGHLY ACCELERATED STRESS TESTING – (HAST SERIES)

NEW GENERATION HAST SYSTEM

LARGE TESTING CAPACITY WITH MOST ADVANCED & ENHANCED FEATURES

TRIO-TECH HIGHLY ACCELERATED STRESS TEST (HAST) SYSTEM

Trio-Tech’s HAST-1000X, HAST-6000X, and HAST-9000X pressurized humidity test systems offer a fast, reliable, and cost-effective alternative to conventional Damp Heat 85/85 temperature and humidity testing. These systems are designed for plastic-encapsulated integrated circuits and other microelectronic devices. Industry leaders estimate that HAST testing accelerates results by 10 to 40 times compared to traditional methods—enabling quicker characterization, evaluation, and qualification of today’s increasingly complex microelectronics.

As a technology and market leader in HAST testing, Trio-Tech offers advanced, turnkey solutions that include systems, racks, training, and testing services—with over 600 installations worldwide.

All Express Test HAST systems meet or exceed JEDEC Standard No. A110 for Highly Accelerated Temperature and Humidity Stress Testing.

Key features of Trio-Tech HAST Systems

  • Versatile Testing Capabilities
    Supports HAST, Autoclave, and Damp Heat 85/85 testing on all Express Test systems.
  • High Testing Capacity
    Testing capacity range from 64 – 15,000 litres (Custom sizes available upon request)
  • Dual Vessel
    Design – Steam Generator and Chamber Vessel
    With a patented circumference heating system, which ensures uniform temperature and humidity while preventing condensation on devices under test
  • User-Friendly Automatic Door System
    Push-button door locking system for ease of use and safety.
  • Advanced Touch Screen Controller
    Built-in data logger with real-time trend graphing, programmable and manual test modes for streamlined operations.
  • All in one system control on HAST and Power supplies
    Intuitive touch screen interface controls for simple controlling of all chamber parameters and power supplies, with two programming modes available.
  • Flexible Bias Wire Configuration
    Supports a wide range of testing applications and experimentation.
  • 4 Digital Output
    Allows external power supply control and automation.
  • IEEE Power Supply Control
    Enables programming and triggering of external power supply
  • N2 Purging Option (Ramp-Down)
    Decrease system ramp down time of the system hence preventing ‘baking effect’ on the test device.
  • N2 Purging Option (Ramp-Up)
    Clears internal air to minimize vapour build-up, protecting test devices during ramp up.

Specifications

  • Temperature Range: 105°C to 150°C.
  • Humidity Range: 60% to 100% R.H
  • Testing capacity: 61 – 657 Litres (Other testing capacity available upon request)
  • Standard System (Vessel Dimension) HAST 1000X (Diameter x Depth) – 36cm x 60cm (Approx. 61 Litres) HAST 6000X (Diameter x Depth) – 60cm x 60cm (Approx. 169 Litres)

HAST 9000X (Diameter x Depth) – 81.2cm x 127cm (Approx. 657 Litres)

(Other testing capacity available upon request)

NEW GENERATION CENTRIFUGE

MOST ADVANCED WITH ENHANCED FEATURES

TRIO-TECH CENTRIFUGE SYSTEM – CENTRISAFE SERIES

The CENTRISAFE® Series from Trio-Tech is a high-performance line of insert-spun centrifugal accelerators engineered to meet the rigorous demands of high-capacity, high-speed, continuous-duty acceleration testing. Built to comply with MIL Spec standards for X, Y, and Z axis testing, the Centrisafe Series delivers industry-leading safety, reliability, and flexibility.

At the heart of the system is a unique quill shaft spindle assembly, enabling high-speed rotation with powerful ‘G’ force output while ensuring the utmost in performance and structural integrity.

Key Features of the Trio-Tech Centrisafe Systems

  • Programmable Logic Control System
  • Touch Screen Panel with built-in Real-Time Trend Graph.
  • Constant Display of RPM, ‘G’ Level and Dwell Tim
  • 2.5 Minute Cycle Times
  • New Improved Spindle Design for Longer Life
  • Full One Year Warranty on System
  • Satisfy Exacting Military Standards Procedures
  • New P.M. Type Motor Provides Greater Reliability
  • Five Standard Safety Features
  • “Built Like a Safe” – The Industry Standard for Safety and Reliability
  • Key-locked Front Access Door Allows Easy Maintenance

Programmable Logic Control System

PLC Control System – Intuitive touch screen interface allows users to enter test parameters such as radius and desired ‘G’ level, with automatic RPM calculation. Real-time display of RPM, ‘G’ force, and dwell time ensures easy monitoring throughout each test cycle.

Touch Screen Panel with Built-in Real-Time Trend Graph

The user-friendly Touch Screen Interface – Display of Real-Time Trend Graph, RPM, ‘G’ level and dwell time as well as system status. PLC Control System used in conjunction with a Supervisory Code for programming the centrifugal acceleration tests.

Rotor and Inserts Configurations

Trio-Tech engineers optimize rotor and insert design by factoring in material properties, intra-granular stress corrosion resistance, support configurations, and rotor-bearing dynamics. These custom-tailored designs are built to withstand stress levels significantly beyond standard requirements, ensuring unmatched test integrity and repeatability.

ROTOR STYLES AVAILABLE

ARTIC TEMPERATURE CONTROLLED WAFER CHUCKS

The Artic TC series of temperature-controlled wafer chucks are used for test and characterization of semiconductor wafers and other components at hot and cold temperatures.

Several models are available with temperature ranges from -65 degrees C to + 400 degrees C. Chucks are available in 4,6-,8- and 12-inch diameters. These systems offer several design features which provide excellent performance to meet the most demanding customer applications.

Trio-Tech provides full turn-key solutions for wafer probing at hot and cold temperatures including triaxial guarding, rapid cool down units, probe station adapters, environmental enclosures, air dryers and dew point monitors.

  • Shaker / Vibration System ( Air-Cooled / Water-Cooled)
  • Shock Test Machine
  • P.I.N.D Tester
  • Bobcat/Lynx/Puma/Jaguar (Data Acquisition)

Vibration Testing Specs:

  • Sine (Pk): 1100 kgf
  • Random (Rms): 1100 kgf
  • Shock (Pk): 2200 kgf
  • Useable Frequency: 5-3,000Hz
  • Max Velocity: 2 m/s
  • Max Acceleration: 100g
Universal Far East