Temperature Test Chambers

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• High temperature change rate
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

25 /50 /100 /200 / 350 / 600 / 1000 / 1500 / 2000 / 3000

Options

• entry ports ∅ 50 mm, 80 mm und 125 mm
• Shelves
• Panoramic window, multiple glazed, sized 570 x 710 mm; for units = 200 ltr.
• Hand-hole in the door
• Pt 100 for temperature measuring on test specimen
• Alternative reversible to controller function
• Air dryer system
• Mobile unit design
• Temperature protection for test-specimen
• Water cooled compressor
• CID software for programming and documentation
• Variable air speed in the test space
• RS 232 interface changeable to USB
• ETHERNET interface RJ 45

Temperature range

-40°C / +180°C
-70°C / +180°C

Description

For more information on the products or if you require a quotation, do feel free to fill in the form.

Temperature Test Chambers (Bench Top Version)

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• High temperature change rate
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

25 /50

Options

• entry ports ∅ 50 mm, 80 mm und 125 mm
• Rack incl. 1 shelf
• Table with height 330 or 515 mm
• Window, multiple glazed
• Pt 100 for temperature measuring on test specimen
• Reversible to controller function
• Air dryer system
• Temperature protection for test-specimen
• CID software for programming and documentation
• Variable air speed in the test space
• RS 232 interface changeable to USB
• ETHERNET interface RJ 45

Temperature range

-40°C / +180°C
-65°C / +180°C

Description

For more information on the products or if you require a quotation, do feel free to fill in the form.

Stress Screening Climatic Chambers

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Service-friendly capacitive humidity measurement system
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• High temperature change rate
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

100 / 200 / 350 / 600 / 1000 / 1500 / 2000 / 3000

Options

• entry ports ∅ 50 mm, 80 mm und 125 mm
• Shelves
• Panoramic window, multiple glazed, sized 570 x 710 mm
• Hand-hole in the door
• Pt 100 for temperature measuring on test specimen
• Specimen alternative reversible to controller function
• Air dryer system
• Mobile unit design
• Temperature protection for test-specimen
• Water cooled compressor
• CID software for programming and documentation
• Variable air speed in the test space
• RS 232 interface changeable to USB
• ETHERNET interface RJ 45

Temperature change rates

5 to 30 K/min

Temperature range

-40°C / +180°C
-70°C / +180°C

Humidity range

10 – 95 % RH

Description

For more information on the products or if you require a quotation, do feel free to fill in the form.

Thermal Shock Test Chambers

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• Observation window
• Air dryer system to avoid freezing in long time testing
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Extreme high temperature change rates
• Up to 3000 cycles without defrosting
• Minimum external measurements due to compact method of construction
• Service-friendly construction
• Minimum noise level
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Options

• Cycle operation in the cold chamber
• Increased entry ports ∅ 125 mm (for 130 + 350 ltr.)
• baskets in different design
• Increased temperature range hot chamber + 250°C (for 130 ltr.)
• Temperature protection for test specimen
• Pt 100 for test specimen measuring
• CID software for programming and documentation
• Water cooled condenser for TSS -70/32
• Air cooled condenser for TSS -70/130 and TSS -70/350
• RS 232 interface changeable to USB
• ETHERNET interface RJ 45
• Higher test load

Test space capacity in liters

32 / 66 / 130 / 350

Temperature range

Hot chamber: +50°C / +200°C

Cold chamber: -80°C / +100°C

Description

Vibration Climatic Test Chambers

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Service-friendly capacitive humidity measurement system (CV)
• Single-hand operated door handle, lockable
• 2 entry port ∅ 125mm
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• Very high temperature change rates
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Interface with every electrodynamics shaker
• Interior in high quality stainless steel grade 1.4301
• Complies with current CE and EMC regulation

Test space capacity in liters

390 / 670 / 1000 / 1700 / 2200

Options

• entry ports ∅ 50 mm, 80 mm und 125 mm
• Panoramic window, sized 570 x 710 mm
• Pt 100 for temperature measuring on test
• Specimen alternative reversible to controller function
• Air dryer system
• Electronic vertical movement
• Standard floor for use as a climatic chamber
• Mobile design
• Temperature protection for test-specimen
• CID software for programming and documentation
• RS 232 interface changeable to USB
• ETHERNET interface RJ 45

Temperature change rates

5 to 20 K/min

Temperature range

-40°C / +180 °C
-70°C / +180°C

Humidity range

10 – 98 % RH

For more information on the products or if you require a quotation, do feel free to fill in the form.

Walk-In and Drive-In Climatic Chambers

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Service-friendly capacitive humidity measurement system
• single-hand operated door handle, lockable
• entry port ∅ 50 mm
• error display in plain text
• potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• High temperature change rate
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Test space capacity

>2 m³

Humidity range

10-98% RH

Options

• Light modules
• Version for corrosion testing
• Version for airbag shoot
• Explosion-proof version
• Version for vibration testing

Types

• Illumination with IR or UV light
• Corrosion chambers
• Airbag chambers
• Atex chambers
• Vibration Walk-In chambers

For more information on the products or if you require a quotation, do feel free to fill in the form.

Climatic Chambers for the Solar and Photovoltaic Industry

CTS is the only European manufacturer of environmental simulation equipment that, applying the most advanced technology in our sector, complies 100% with the EN 61215 specification for the certification of photovoltaic panels.

Characteristics:
We offer the following equipment for compliance with each standard.

• IEC 61215 part 10.10 – UV Test with black tunnel
• IEC 61215 part 10.11 – Temperature shock cycling test
• IEC 61215 part 10.12 – Humidity freezing test
• IEC 61215 part 10.13 – Damp heat test
• IEC 62108 part 10.6, 10,7 y 10,8 – Concentrator photovoltaic (CPV) modules.
• IEC 61701 – Salt fog and corrosion test
• IEC 61646 – Thin film PV modules
• IEC 60904-9 – Solar Simulation

Description

For more information on the products or if you require a quotation, do feel free to fill in the form.

Explosion-protected Chambers for Li-Ion batteries

Included in the standard version

• Multi-color touch panel / 32 Bit Controller
• Service-friendly capacitive humidity measurement system
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• Shelf, stainless steel
• Error display in plain text
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• High temperature change rate
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Refrigerants: chloride free, hermetically sealed

Test space capacity in liters

200 / 350 / 600 / 1000 / 1500 / 2000

Options

• entry ports ∅ 50 mm, 80 mm und 125 mm completely welded
• Shelves
• panoramic window, multiple glazed, sized 570 x 710 mm; for units = 200 ltr.
• Break rupture membrane
• Pt 100 for temperature measuring on test specimen
• Electronic door open
• Venting duct
• Temperature Limiter
• Emergency stop button
• CO2 flushing device
• CO, H2 and HC Sensor
• N2 Inertization system
• Hazard Level 0 to 7

Temperature range

-40°C / +180°C
-70°C / +180°C

Humidity range

10 – 95 % RH

Description

CTS GmbH developed a safety concept and confirmed from the TÜV SÜD Industry Service with the certificate Nr. IS-EG1-10-1546532 for manufacturing of climatic chambers for Li-Ion test.

Plant Growth Climatic Chambers

The model CPH-L chambers, with precise control of the temperature, relative humidity and light allow long duration testing and offer researchers and biologists access to any climate to simulate nature’s action.

This equipment, designed exclusively for the biological and bio-pharmaceutical sectors, allow for versions of illumination adaptable to any type of simulation such as plant growth, insect incubation, germination, seed storage and arabidopsis.

Included in the standard version

• Multicolor touch panel
• Service-friendly capacitive humidity measurement system
• Single-hand operated door handle, lockable
• Entry port ∅ 50 mm
• 4 shelf, stainless steel for CPHL 6 and 8 for CPHL 12
• Light intensity from 100 to 620 µmol m-2s-1
• Potential free contact for malfunction signal
• RS 232 interface
• Service-friendly construction
• Minimum noise level
• Simple user-friendly operation and programming
• Low power-consumption datas
• Optimized parameters for highest testing precision
• Complies with current CE and EMC regulation
• Control: microprocessor control and monitoring system
• Test space: stainless steel grade 1.4301
• Mobile design

Options

• entry ports ∅ 50 mm, 80 mm
• Shelves
• Panoramic window (only without lights)
• Hand-hole in the door
• Pt 100 for temperature measuring on
• Test specimen alternative reversible to controller function
• CID software for programming and documentation
• Light intensity adjustable from 10% to 100%
• LED Illumination

For more information on the products or if you require a quotation, do feel free to fill in the form.